| Receiver type |
Digitally down-converting software-defined receiver
with two independent and mutually exclusive inputs, one per each range.
|
| Frequency ranges |
Range 1: 8 kHz to 80 MHz (direct sampling)
Range 2: 43 MHz to 8 GHz (superheterodyne)
|
| Tuning resolution |
1 Hz |
| Mode |
AM, AMS, LSB, USB, DSB, ISB, CW, FMN, FMW, FSK, UDM (user-defined mode), DRM mode (optional) |
| Range 1: 8 kHz to 80 MHz
|
| Image Rejection |
90 dB typ. |
| P1dB |
-8 dBm typ. |
| IP3 |
+30 dBm typ. |
| Input damage level |
+30 dBm |
| SFDR |
105 dB |
| Noise figure |
16 dB |
| MDS |
-128 dBm @ 10 MHz, 500 Hz BW |
| LO Phase noise |
-145 dBc/Hz @ 10 kHz |
| Range 2: 43 MHz to 8 GHz
|
| Image Rejection |
60 dB typ. |
| P1dB |
-15 dBm typ. (Preamp OFF)
-32 dBm typ. (Preamp ON)
|
| IP3 |
+6 dBm typ. (Preamp OFF)
-11 dBm typ. (Preamp ON)
|
| Input damage level |
+30 dBm |
| SFDR |
90 dB (Preamp OFF)
85 dB (Preamp ON)
|
| Noise figure |
15 dB typ. (Preamp OFF)
6 dB typ. (Preamp ON)
|
| MDS |
-129 dBm @ 800 MHz, 500 Hz BW (Preamp OFF)
-138 dBm @ 800 MHz, 500 Hz BW (Preamp ON)
|
| LO Phase noise |
-106 dBc/Hz @ 10 kHz typ.
|
| Common specifications for both Range 1 and Range 2
|
| Internal spurious |
below -100 dBm |
| RSSI accuracy |
2 dB typ. |
| RSSI sensitivity |
-140 dBm |
| Processing and recording bandwidth
|
20 kHz - 32 MHz over USB 3.0
20 kHz - 6.4 MHz over USB 2.0
20 kHz - 16 MHz over 1Gbps LAN |
Demodulation bandwidth
(selectivity) |
1 Hz - 320 kHz
(continuously variable in 1 Hz steps) |
| Spectrum analyzers |
Input spectrum/waterfall, 80/34 MHz BW, 2.6 kHz RBW
DDC spectrum/waterfall, 32 MHz BW, 1 Hz RBW
Channel spectrum, 320 kHz BW, 1 Hz RBW
Demodulated audio, 64 kHz BW, 1 Hz RBW
|
| ADC |
16 bit, 200 MSPS |
| Tuning stability |
0.1 ppm (0 to 50 °C) |
| Antenna inputs |
2 x 50 ohm (SMA connectors) |
| Output |
24/16-bit digitized I&Q signal over USB/LAN interface |
| Interface |
USB 3.0
USB 2.0
1 Gbit Ethernet with PoE (Power over Ethernet) |
| Self-diagnostics |
BIT (Built-In test) of the signal and processing path.
Thermal management - temperature monitoring. |
| Power supply |
16 W (12 V/1.33 A), or
20 W (PoE - IEEE 802.3at) |
| Operating temperature |
0 to 50 °C (with 12V PSU and via PoE with /LP HW option) |
| Dimensions |
166 x 97 x 59 mm (6.5" x 3.8" x 2.3") |
| Weight |
839 g (29.6 oz) |
